Send documentation comments to mdsfeedback-doc@cisco.com
43-37
Cisco MDS 9000 Family Fabric Manager Configuration Guide
OL-17256-03, Cisco MDS NX-OS Release 4.x
Chapter 43 Configuring Certificate Authorities and Digital Certificates
Default Settings
Default Settings
Table 43-2 lists the default settings for CAs and digital certificate parameters.
Ta b l e 43-1 Maximum Limits for CA and Digital Certificate
Feature Maximum Limit
Trust points declared on a switch 16
RSA key-pairs generated on a switch 16
Identity certificates configured on a switch 16
Certificates in a CA certificate chain 10
Trust points authenticated to a specific CA 10
Ta b l e 43-2 Default CA and Digital Certificate Parameters
Parameters Default
Trust point None
RSA key-pair None
RSA key-pair label Switch FQDN
RSA key-pair modulus 512
RSA key-pair exportable Yes
Revocation check method of trust point CRL.
To Next Page
Loading...
Need help?
General
