Send documentation comments to mdsfeedback-doc@cisco.com
59-16
Cisco MDS 9000 Family Fabric Manager Configuration Guide
OL-17256-03, Cisco MDS NX-OS Release 4.x
Chapter 59 Configuring RMON
Default Settings
Step 3 Delete any alarm by selecting it, then click Delete.
Viewing the RMON Log
To view the RMON log using Device Manager, follow these steps:
Step 1 Choose Admin > Events > Threshold Manager and click More on the Threshold Manager dialog box.
Step 2 Click the Log tab in the RMON Thresholds dialog box.
You see the RMON Thresholds Log tab (see Figure 59-19). This is the log of RMON events that have
been triggered by the Threshold Manager.
Figure 59-19 RMON Thresholds Log Tab
Default Settings
Table 59-1 lists the default settings for all RMON features in any switch.
Ta b l e 59-1 Default RMON Settings
Parameters Default
RMON alarms Disabled.
RMON events Disabled.