Send documentation comments to mdsfeedback-doc@cisco.com
7-33
Cisco MDS 9000 Family Fabric Manager Configuration Guide
OL-17256-03, Cisco MDS NX-OS Release 4.x
Chapter 7 Fabric Manager Web Client
Inventory
Figure 7-26 Modules Tab
Step 2 Do one of the following:
• Select a SAN to display module inventory information for all fabrics in the SAN.
• Select one of the fabrics to display module inventory information for that fabric.
• Expand a fabric and select one of the VSANs to display module inventory information for that
VSAN.
Viewing Detailed Information for End Devices
To view detailed inventory information about end devices using Fabric Manager Web Client, follow
these steps:
Step 1 Click the Inventory tab, and then click End Devices.
You see the End Devices tab window as shown in Figure 7-27.
To Next Page
Loading...
Need help?
General
