Send documentation comments to mdsfeedback-doc@cisco.com
62-33
Cisco MDS 9000 Family Fabric Manager Configuration Guide
OL-17256-03, Cisco MDS NX-OS Release 4.x
Chapter 62 Configuring Call Home
Message Contents
Severity levels range from 0 to 9, with 9 having the highest urgency. Each syslog level has keywords and
a corresponding syslog level as listed in
Table 62-4.
Note Call Home does not change the syslog message level in the message text. The syslog message texts in
the Call Home log appear as they are described in the Cisco MDS 9000 Family System Messages Guide.
Note Call Home severity levels are not the same as system message logging severity levels (see Chapter 61,
“Configuring System Message Logging” and the Cisco MDS 9000 Family System Messages Guide).
Message Contents
The following contact information can be configured on the switch:
• Name of the contact person
• Phone number of the contact person
• E-mail address of the contact person
• Mailing address to which replacement parts must be shipped, if required
• Site ID of the network where the site is deployed
• Contract ID to identify the service contract of the customer with the service provider
Table 62-5 describes the short text formatting option for all message types.
Ta b l e 62-4 Severity and Syslog Level Mapping
Call Home Level Keyword Used Syslog Level Description
Catastrophic (9) Catastrophic N/A Network wide catastrophic failure.
Disaster (8) Disaster N/A Significant network impact.
Fatal (7) Fatal Emergency (0) System is unusable.
Critical (6) Critical Alert (1) Critical conditions, immediate attention needed.
Major (5) Major Critical (2) Major conditions.
Minor (4) Minor Error (3) Minor conditions.
Warning (3) Warning Warning (4) Warning conditions.
Notify (2) Notification Notice (5) Basic notification and informational messages.
Possibly independently insignificant.
Normal (1) Normal Information (6) Normal event signifying return to normal state.
Debug (0) Debugging Debug (7) Debugging messages.
Ta b l e 62-5 Short Text Messages
Data Item Description
Device identification Configured device name
Date/time stamp Time stamp of the triggering event
To Next Page
Loading...
Need help?
General
