Cisco AP775A - Nexus Converged Network Switch 5010

Send documentation comments to mdsfeedback-doc@cisco.com
69-12
Cisco MDS 9000 Family Fabric Manager Configuration Guide
OL-17256-03, Cisco MDS NX-OS Release 4.x
Chapter 69 Fabric Manager Web Services
Methods
Error
Error Code: 300— General SAN Service exception .
Error code: 201—Invalid argument in Web Service exception.
getEnclosureByPWwn
Returns the enclosure that are associated with a physical WWN.
Parameters
wwn—Physical WWN of the switch.
Return Value
Returns the enclosure based on physical WWN.
Error
Error Code: 300— General SAN Service exception.
Error code: 201—Invalid argument in Web Service exception.
updateEnclosure
Update the enclosure with the value that is passed as parameter.
Parameters
value—Value to update the enclosure.
Return Value
None.
Error
Error Code: 300— General SAN Service exception.
Error code: 201—Invalid argument in Web Service exception.
updateEndportEnclosure
Update the end port enclosure with the value that is passed as parameter.
Parameters
endportKey—Value for the endportKey.
enclosureKey—Value for the enclosureKey.
Return Value
None.
Error
Error Code: 300— General SAN Service exception.