Send documentation comments to mdsfeedback-doc@cisco.com
50-75
Cisco MDS 9000 Family Fabric Manager Configuration Guide
OL-17256-03, Cisco MDS NX-OS Release 4.x
Chapter 50 Configuring iSCSI
Default Settings
Step 1 Choose End Devices > iSNS.
You see the iSNS configuration in the Information pane.
Step 2 Click the Cloud Discovery tab and check the Manual Discovery check box.
Step 3 Click the Apply Changes icon to save this change.
Configuring Automatic iSNS Cloud Discovery
To configure automatic iSNS cloud discovery using Fabric Manager, follow these steps:
Step 1 Choose End Devices > iSNS.
You see the iSNS configuration in the Information pane.
Step 2 Click the Cloud Discovery tab and check the AutoDiscovery check box.
Step 3 Click the Apply Changes icon to save this change.
Configuring iSNS Cloud Discovery Distribution
To configure iSNS cloud discovery CFS distribution using Fabric Manager, follow these steps:
Step 1 Choose End Devices > iSNS.
You see the iSNS configuration in the Information pane.
Step 2 Click the CFS tab and select enable from the Admin drop-down menu for the cloud discovery feature.
Step 3 Select enable from the Global drop-down menu for the cloud discovery feature.
Step 4 Click the Apply Changes icon to save this change.
Default Settings
Table 50-2 lists the default settings for iSCSI parameters.
Ta b l e 50-2 Default iSCSI Parameters
Parameters Default
Number of TCP connections One per iSCSI session.
minimum-retransmit-time 300 msec.
keepalive-timeout 60 seconds.
max-retransmissions 4 retransmissions.
PMTU discovery Enabled.
pmtu-enable reset-timeout 3600 sec.
To Next Page
Loading...
Need help?
General
