Send documentation comments to mdsfeedback-doc@cisco.com
43-36
Cisco MDS 9000 Family Fabric Manager Configuration Guide
OL-17256-03, Cisco MDS NX-OS Release 4.x
Chapter 43 Configuring Certificate Authorities and Digital Certificates
Maximum Limits
Importingthe CRL
To import the CRL to the trust point corresponding to the CA, follow these steps:
Step 1 Click Switches > Security > PKI in the Physical Attributes pane.
Step 2 Click the Trust Point Actions tab in the Information pane.
Step 3 Select the crlimport option from the Command drop-down menu to import the CRL to the selected trust
point.
Step 4 Enter the input file name with the CRL in the bootflash:filename format, in the URL field.
Step 5 Click Apply Changes to save the changes.
Note The identity certificate for the switch that was revoked (serial number 0A338EA1000000000074) is
listed at the end.
Maximum Limits
Table 43-1 lists the maximum limits for CAs and digital certificate parameters.
To Next Page
Loading...
Need help?
General
