Send documentation comments to mdsfeedback-doc@cisco.com
5-33
Cisco MDS 9000 Family Fabric Manager Configuration Guide
OL-17256-03, Cisco MDS NX-OS Release 4.x
Chapter 5 Fabric Manager Client
Modifying the Device Grouping
Using Alias Names as Enclosures
To create an enclosure that uses the alias name as the name of the enclosure using Fabric Manager, follow
these steps:
Step 1 Expand End Devices and select Hosts or Storage from the Physical Attributes pane.
You see the list of devices in the Information pane. The NxPorts tab is the default.
Step 2 Right-click the enclosure names that you want to convert to alias names and select Alias > Enclosure as
shown in
Figure 5-12.
Figure 5-12 Alias Enclosure
The Ailas > Enclosures window appears as shown in Figure 5-13. It contains a list of expressions. You
can also add expressions to the list and modify expressions in the current list.
Figure 5-13 List of Expressions
Step 3 Click the Apply Changes icon to save the changes and then click Close.
To Next Page
Loading...
Need help?
General
