Send documentation comments to mdsfeedback-doc@cisco.com
62-32
Cisco MDS 9000 Family Fabric Manager Configuration Guide
OL-17256-03, Cisco MDS NX-OS Release 4.x
Chapter 62 Configuring Call Home
Call Home Message Levels
Call Home Message Levels
Call Home messages (sent for syslog alert groups) have the syslog severity level mapped to the Call
Home message level (see the
“Syslog-Based Alerts” section on page 62-12).
This section discusses the severity levels for a Call Home message when using one or more switches in
the Cisco MDS 9000 Family. Call Home message levels are preassigned per event type.
Line Card Hardware
show module
show version
show tech-support
platform
show tech-support
sysmgr
show hardware
show sprom all
Events related to standard or intelligent line card hardware. show tech-support
Supervisor Hardware
show module
show version
show tech-support
platform
show tech-support
sysmgr
show hardware
show sprom all
Events related to supervisor modules. show tech-support
Inventory
show module
show version
show hardware
show inventory
show system uptime
show sprom all
show license usage
Inventory status is provided whenever a unit is cold booted, or when
FRUs are inserted or removed. This is considered a noncritical event,
and the information is used for status and entitlement.
show version
Test
show module
show version
User generated test message. show version
Table 62-3 Event Categories and Executed Commands (continued)
Event Category Description Executed Commands
To Next Page
Loading...
