Send documentation comments to mdsfeedback-doc@cisco.com
7-45
Cisco MDS 9000 Family Fabric Manager Configuration Guide
OL-17256-03, Cisco MDS NX-OS Release 4.x
Chapter 7 Fabric Manager Web Client
Admin
Note If you see a database file lock error in the database log, you can fix it by shutting down and restarting
the database server using the web client.
Recovering a Web Server Password
Fabric Manager Web Client user passwords are encrypted and stored locally on the workstation where
you installed Web Server. If you forget a password, you can create a new network-admin user locally on
the workstation where you installed Web Server and then log in and delete the old user account under
the Admin tab.
To create a user on the workstation where you installed Web Server and delete the old user, follow these
steps:
Step 1 Go to the Web Server installation directory and wnter the cd command to access the bin directory.
Step 2 Enter the following line to create a user:
addUser.{sh,bat} <userName> <dbpassword>
Step 3 Choose Admin > Configure > Web Users > Local Database.
You see the list of users in the local database.
Step 4 Select the user that you want to delete and click Delete to remove the old user.
Starting, Restarting, and Stopping Services
To start, restart, or stop services using Fabric Manager Web Client, follow these steps:
Step 1 Click the Admin tab, and then click Status.
You see a table of services and the status of each as shown in Figure 7-38.
To Next Page
Loading...
Need help?
General
