CHAPTER
Send documentation comments to mdsfeedback-doc@cisco.com
18-1
Cisco MDS 9000 Family Fabric Manager Configuration Guide
OL-17256-03, Cisco MDS NX-OS Release 4.x
18
Managing System Hardware
This chapter provides details on how to manage system hardware other than services and switching
modules and how to monitor the health of the switch. It includes the following sections:
• Displaying Switch Hardware Inventory, page 18-1
• Running the CompactFlash Report, page 18-2
• Displaying the Switch Serial Number, page 18-3
• Displaying Power Usage Information, page 18-3
• Power Supply Configuration Modes, page 18-4
• About Crossbar Management, page 18-7
• About Module Temperature, page 18-11
• About Fan Modules, page 18-12
• Default Settings, page 18-13
Displaying Switch Hardware Inventory
To view information on the field replaceable units (FRUs) in the switch, including product IDs and serial
numbers, follow these steps:
Step 1 In Fabric Manager, choose a fabric or switch in the Logical Domains pane, then expand Switches and
select Hardware in the Physical Attributes pane.
You see a list like the one shown in Figure 18-1.
Figure 18-1 Fabric Manager Hardware Inventory
To Next Page
Loading...
Need help?
General
