Send documentation comments to mdsfeedback-doc@cisco.com
30-31
Cisco MDS 9000 Family Fabric Manager Configuration Guide
OL-17256-03, Cisco MDS NX-OS Release 4.x
Chapter 30 Configuring and Managing Zones
Zone Set Duplication
Backing Up Zones
To back up the full zone configuration using Fabric Manager, follow these steps:
Step 1 Choose Zone > Edit Local Full Zone Database.
You see the Select VSAN dialog box.
Step 2 Select a VSAN and click OK.
You see the Edit Local Full Zone Database dialog box for the selected VSAN as shown in Figure 30-31.
Figure 30-31 Edit Local Full Zone Database
Step 3
Choose File > Backup > This VSAN Zones to back up the existing zone configuration to a workstation
using TFTP, SFTP, SCP, or FTP.
You see the Backup Zone Configuration dialog box shown in Figure 30-32.
To Next Page
Loading...
Need help?
General
