Send documentation comments to mdsfeedback-doc@cisco.com
30-10
Cisco MDS 9000 Family Fabric Manager Configuration Guide
OL-17256-03, Cisco MDS NX-OS Release 4.x
Chapter 30 Configuring and Managing Zones
Zone Configuration
Figure 30-6 Confirm Changes Dialog Box
Step 6
If you want to see the CLI commands, right-click in the dialog box and click CLI Commands from the
pop-up menu.
Step 7 Click Finish to save the configuration changes.
Zone Configuration
This section describes how to configure zones and includes the following topics:
• About the Edit Local Full Zone Database Tool, page 30-11
• Configuring a Zone Using the Zone Configuration Tool, page 30-12
• Adding Zone Members, page 30-14
To Next Page
Loading...
