Send documentation comments to mdsfeedback-doc@cisco.com
30-48
Cisco MDS 9000 Family Fabric Manager Configuration Guide
OL-17256-03, Cisco MDS NX-OS Release 4.x
Chapter 30 Configuring and Managing Zones
Default Settings
Default Settings
Table 30-5 lists the default settings for basic zone parameters.
Table 30-5 Default Basic Zone Parameters
Parameters Default
Default zone policy Denied to all members.
Full zone set distribute The full zone set(s) is not distributed.
Zone based traffic priority Low.
Read-only zones Read-write attributes for all zones.
Broadcast frames Sent to all Nx ports.
Broadcast zoning Disabled.
Enhanced zoning Disabled.
To Next Page
Loading...
