Send documentation comments to mdsfeedback-doc@cisco.com
35-2
Cisco MDS 9000 Family Fabric Manager Configuration Guide
OL-17256-03, Cisco MDS NX-OS Release 4.x
Chapter 35 Discovering SCSI Targets
About SCSI LUN Discovery
Starting SCSI LUN Discovery
To begin SCSI LUN discovery using Device Manager, follow these steps:
Step 1 Choose FC > Advanced > LUNs.
You see the LUN Configuration dialog box.
Figure 35-1 LUN Configuration Dialog Box
Step 2 Set StartDiscovery to local, remote or both.
Step 3 Choose the DiscoveryType and OS.
Step 4 Click Apply to begin discovery.
About Initiating Customized Discovery
Customized discovery consists of a list of VSAN and domain pairs that are selectively configured to
initiate a discovery. The domain ID is a number from 0 to 255 in decimal or a number from 0x0 to 0xFF
in hex.
Initiating Customized Discovery
To initiate a customized discovery using Device Manager, follow these steps:
Step 1 Click the VSAN drop-down menu and select the VSAN in which you want to initiate a customized
discovery.
Step 2 Click FC > Advanced > LUNs.
You see the LUN Configuration dialog box.
Step 3 Set StartDiscovery to local, remote or both.
Step 4 Fill in the DiscoveryType and OS fields.
To Next Page
Loading...
Need help?
General
