Send documentation comments to mdsfeedback-doc@cisco.com
7-46
Cisco MDS 9000 Family Fabric Manager Configuration Guide
OL-17256-03, Cisco MDS NX-OS Release 4.x
Chapter 7 Fabric Manager Web Client
Admin
Figure 7-38 Fabric Manager Services Status
Step 2 Select the services you want to start, restart, or stop.
Step 3 Click Start or Stop, or Restart.
The selected services are started, restarted, or stopped.
Note If the word “more” is in the Status column, you can click it to view a detailed status of the
service.
Note You need to configure Performance collection in order to start, stop or restart Performance
Collector.
Adding, Editing, and Removing Managed Fabrics
Fabric Manager Web Client reports information gathered by the Fabric Manager Server on any fabric
known to the Fabric Manager Server.
To start managing a fabric from the Fabric Manager Server using Fabric Manager Web Client, follow
these steps:
Step 1 Click the Admin tab, and then click Configure.
Step 2 Click Fabrics in the left navigation pane.
You see the list of fabrics (if any) managed by Fabric Manager Server in the Opened column (see
Figure 7-39).
To Next Page
Loading...
