Send documentation comments to mdsfeedback-doc@cisco.com
3-5
Cisco MDS 9000 Family Fabric Manager Configuration Guide
OL-17256-03, Cisco MDS NX-OS Release 4.x
Chapter 3 Fabric Manager Server
Modifying Fabric Manager Server
SNMP Specific
• snmp.preferTCP—If this option is set to true, TCP will be the default protocol for the Fabric
Manager Server to communicate with switches. By default, this setting is true. For those switches
that do not have have TCP enabled, the Fabric Manager Server uses UDP. The advantage of this
setting is the ability to designate one TCP session for each SNMP user on a switch. It also helps to
reduce timeouts and increase scalability.
Note If you set this option to false, the same choice must be set in Fabric Manager. The default value
of snmp.preferTCP for Fabric Manager is true.
Performance Chart
• pmchart.currenttime—Specifies the end time to generate a Performance Manager chart. This
should only be used for debugging purposes.
EMC Call Home
• server.callhome.enable—Enables or disables EMC Call Home. By default, it is disabled.
• server.callhome.location—Specifies the Location parameter.
• server.callhome.fromEmail—Specifies the 'From Email' list.
• server.callhome.recipientEmail—Specifies the 'recipientEmail' list.
• server.callhome.smtphost—Specifies the SMTP host address for outbound e-mail.
• server.callhome.xmlDir—Specifies the path to store the XML message files.
• server.callhome.connectType—Specifies the method to use to remotely connect to the server.
• server.callhome.accessType—Specifies the method to use to establish remote communication with
the server.
• server.callhome.version—Specifies the version number of the connection type.
• server.callhome.routerIp—Specifies the public IP address of the RSC router.
Event Forwarding
• server.forward.event.enable—Enables or disables event forwarding.
• server.forward.email.fromAddress—Specifies the 'From Email' list.
• server.forward.email.mailCC—Specifies the 'CC Email' list.
• server.forward.email.mailBCC—Specifies the 'BCC Email' list.
• server.forward.email.smtphost—Specifies the SMTP host address for outbound e-mail.
Deactivation
• deactivate.confirm=deactivate—Specific Request for User to type a String for deactivation.
For more information on setting the server properties, read the server.properties file or see the
“Configuring Fabric Manager Server Preferences” section on page 7-51.
Modifying Fabric Manager Server
Fabric Manager Release 2.1(2) or later allows you to modify certain Fabric Manager Server settings
without stopping and starting the server. These settings include:
To Next Page
Loading...
Need help?
General
