Send documentation comments to mdsfeedback-doc@cisco.com
16-3
Cisco MDS 9000 Family Fabric Manager Configuration Guide
OL-17256-03, Cisco MDS NX-OS Release 4.x
Chapter 16 Managing Configuration Files
Using the File System
• Copying Files, page 16-5
• Performing Other File Manipulation Tasks, page 16-7
Flash Files
To list the files in a directory using Device Manager, follow these steps:
Step 1 Click Admin > Flash Files.
By default, you see the bootflash directory listed for the supervisor’s local partition (see Figure 16-3).
Figure 16-3 Flash Files Dialog Box
Step 2
Select the device and partition for the directory you want to view from the drop-down lists.
You see a list of files and directories.
Creating a Directory
To create a directory using Device Manager, follow these steps:
Step 1 Click Admin > Flash Files.
By default, you see the bootflash directory listed for the supervisor’s local partition (see Figure 16-4).
To Next Page
Loading...
Need help?
General
