Cisco AP775A - Nexus Converged Network Switch 5010 User Manual

Send documentation comments to mdsfeedback-doc@cisco.com
62-12
Cisco MDS 9000 Family Fabric Manager Configuration Guide
OL-17256-03, Cisco MDS NX-OS Release 4.x
Chapter 62 Configuring Call Home
Syslog-Based Alerts
In Device Manager, choose Admin > Events > Call Home.
Step 2 Click the Profiles tab in the Information Pane.
You see the Call Home profiles shown in Figure 62-8.
Figure 62-8 Call Home Profiles
Step 3 Set a message level for each switch using the drop-down menu in the MsgLevel column.
Step 4 Click the Apply Changes icon to save your changes.
Syslog-Based Alerts
You can configure the switch to send certain syslog messages as Call Home messages. The
syslog-group-port alert group selects syslog messages for the port facility. The Call Home application
maps the syslog severity level to the corresponding Call Home severity level (see the
“Call Home
Message Levels” section on page 62-32). For example, if you select level 5 for the Call Home message
level, syslog messages at levels 0, 1, and 2 are included in the Call Home log.
Whenever a syslog message is generated, the Call Home application sends a Call Home message
depending on the mapping between the destination profile and the alert group mapping and based on the
severity level of the generated syslog message. To receive a syslog-based Call Home alert, you must
associate a destination profile with the syslog alert groups (currently there is only one syslog alert
group—syslog-group-port) and configure the appropriate message level (see the
“Call Home Message
Level Feature” section on page 62-11).
Note Call Home does not change the syslog message level in the message text. The syslog message texts in
the Call Home log appear as they are described in the Cisco MDS 9000 Family System Messages Guide.
Configuring Syslog-Based Alerts Using Fabric Manager
To configure the syslog-group-port alert group using Fabric Manager, follow these steps:
Step 1 Select a switch in the Fabric pane.
Step 2 Expand Switches, expand Events, and select Call Home in the Physical Attributes pane.
You see the Call Home information in the Information pane.
Step 3 Click the Profiles tab.
You see the Call Home profiles shown in Figure 62-9.

Cisco AP775A - Nexus Converged Network Switch 5010 Specifications

General

Brand	Cisco
Model	AP775A - Nexus Converged Network Switch 5010
Category	Switch
Language	English