Cisco AP775A - Nexus Converged Network Switch 5010 User Manual

Send documentation comments to mdsfeedback-doc@cisco.com
65-5
Cisco MDS 9000 Family Fabric Manager Configuration Guide
OL-17256-03, Cisco MDS NX-OS Release 4.x
Chapter 65 Configuring Port Tracking
Port Tracking
Figure 65-5 Successful Port Tracking Established
Step 10
Click Close to close the dialog box.
About Tracking Multiple Ports
You can control the operational state of the linked port based on the operational states of multiple tracked
ports. When more than one tracked port is associated with a linked port, the operational state of the
linked port will be set to down only if all the associated tracked ports are down. Even if one tracked port
is up, the linked port will stay up.
In Figure 65-6, only if both ISLs 2 and 3 fail, will the direct link 1 be brought down. Direct link 1 will
not be brought down if either 2 or 3 are still functioning as desired.
Figure 65-6 Traffic Recovery Using Port Tracking
Tracking Multiple Ports
To track multiple ports, see “Operationally Binding a Tracked Port” section on page 65-3.
FCFC FCFC
WAN or
MAN
WAN or
MAN
1
3
Port Channel
2
FCIP
X
X
X
120491
fc 8/6

Cisco AP775A - Nexus Converged Network Switch 5010 Specifications

General

Brand	Cisco
Model	AP775A - Nexus Converged Network Switch 5010
Category	Switch
Language	English