Cisco AP775A - Nexus Converged Network Switch 5010 User Manual

Send documentation comments to mdsfeedback-doc@cisco.com
44-35
Cisco MDS 9000 Family Fabric Manager Configuration Guide
OL-17256-03, Cisco MDS NX-OS Release 4.x
Chapter 44 Configuring IPsec Network Security
Crypto IPv4-ACLs
Configuring Perfect Forward Secrecy
To configure the PFS value using Fabric Manager, follow these steps:
Step 1 Expand Switches > Security and then select IPSEC in the Physical Attributes pane.
You see the IPsec configuration in the Information pane (see Figure 44-30).
Figure 44-30 IPsec Configuration
Step 2 Click the CryptoMap Set Entry tab.
You see the existing crypto maps configured in Figure 44-31.
Figure 44-31 Existing Crypto Maps
Step 3 In the drop-down list in the PFS column select the appropriate value.
Step 4 Click Apply Changes to save your changes.

Cisco AP775A - Nexus Converged Network Switch 5010 Specifications

General

Brand	Cisco
Model	AP775A - Nexus Converged Network Switch 5010
Category	Switch
Language	English