Send documentation comments to mdsfeedback-doc@cisco.com
5-14
Cisco MDS 9000 Family Fabric Manager Configuration Guide
OL-17256-03, Cisco MDS NX-OS Release 4.x
Chapter 5 Fabric Manager Client
Fabric Manager Client Quick Tour: Admin Perspective
• Resync All Open Fabrics— Fabric Manager Server forces all the fabrics to close and re-open. You
may use this option when Fabric Manager Client is not in sync with Fabric Manager Server.
• Rediscover SCSI Targets— Initiates an on-demand discovery to learn recent changes from the SCSI
target switches. You may use this option when Fabric Manager Server is not in sync with SCSI target
switches in the fabric and you do not want to wait until the next polling cycle.
• Preferences—Sets your preferences to customize the behavior of the Fabric Manager Client.
• Import Enclosures—Imports saved enclosures.
• Export
–
Map Image—Generates and export the map to a specified location.
–
Visio—Exports the map to a Visio file.
–
Table—Exports the table data to a text file.
–
Log—Exports the log to a text file.
–
Events—Exports the events to a text file.
–
Enclosures—Exports the enclosure values to a text file.
• Print —Prints the map.
• Exit—Exit Fabric Manager.
View
View menu provides the following options:
• Refresh Map—Refreshes the current map.
• Layout
–
Cancel—Cancels the current layout.
–
Spring—Displays the layout based on spring algorithm.
–
Quick—Quickly displays the layout when the switch has many end-devices.
• Zoom
–
In—Zooms in the view.
–
Out—Zooms out the view.
–
Fit—Fits the view in the fabric pane.
• Grid—Enables the grid view.
• Overview Window—Allows you to center the Fabric pane on the area of the fabric that you want to
see. This option is useful for large fabrics that cannot be displayed entirely within the Fabric pane.
• Legend—Shows all the legends used in the fabric map.
• Find in Map—Finds a device in the fabric map.
Zone
The zone menu provides the following options:
To Next Page
Loading...
Need help?
General
