Send documentation comments to mdsfeedback-doc@cisco.com
7-53
Cisco MDS 9000 Family Fabric Manager Configuration Guide
OL-17256-03, Cisco MDS NX-OS Release 4.x
Chapter 7 Fabric Manager Web Client
Admin
Note Cisco Fabric Manager 3.0(1) does not require you to make changes to the communities.properties file
even if you are using a Cisco MDS 9020 switch or any third-party devices.
Configuring AAA Information
To configure Fabric Manager Server preferences, click the Admin tab, click Configure and then in left
pane select, FMS Users, and AAA and follow the instructions on the screen.
Adding and Removing Users
You can use Fabric Manager Web Client to add and remove Web Server users.
To add a user using Fabric Manager Web Client, follow these steps:
Step 1 Click the Admin tab, and then click Configure.
Step 2 Click Local Database in the left navigation pane.
You see the Local Database page shown in Figure 7-47.
Figure 7-47 Local Database Page
Step 3 Click Add.
You se e t he Add User dialog box shown in Figure 7-48.
To Next Page
Loading...
Need help?
General
