Cisco AP775A - Nexus Converged Network Switch 5010 User Manual

Send documentation comments to mdsfeedback-doc@cisco.com
7-52
Cisco MDS 9000 Family Fabric Manager Configuration Guide
OL-17256-03, Cisco MDS NX-OS Release 4.x
Chapter 7 Fabric Manager Web Client
Admin
Figure 7-45 Add Community Dialog Box
Step 4
Enter the IP mask or address of the community in the IP Mask/Address field.
Note The IP mask can contain wildcards (0s) you can use to assign communities to subnets.
Step 5 Enter the name of the community in the Community field.
Step 6 Click Add to add the community.
To remove a community using Fabric Manager Web Client, follow these steps:
Step 1 Click the Admin tab, and then click Configure.
Step 2 Click Communities in the left navigation pane.
You see the Communities page shown in Figure 7-46.
Figure 7-46 Communities Page
Step 3 Check the check box next to the community that you want to remove and click Remove.

Cisco AP775A - Nexus Converged Network Switch 5010 Specifications

General

Brand	Cisco
Model	AP775A - Nexus Converged Network Switch 5010
Category	Switch
Language	English