Send documentation comments to mdsfeedback-doc@cisco.com
40-8
Cisco MDS 9000 Family Fabric Manager Configuration Guide
OL-17256-03, Cisco MDS NX-OS Release 4.x
Chapter 40 Configuring SNMP
SNMP Trap and Inform Notifications
Step 3 Click the name of the community you want to delete.
Step 4 Click Delete Row to delete this community.
SNMP Trap and Inform Notifications
You can configure the Cisco MDS switch to send notifications to SNMP managers when particular
events occur.
Note Use the SNMP-TARGET-MIB to obtain more information on the destinations to which notifications are
to be sent either as traps or as informs. Refer to the Cisco MDS 9000 Family MIB Quick Reference.
This section includes the following topics:
• Configuring SNMPv2c Notifications, page 40-8
• Configuring SNMPv3 Notifications, page 40-9
• Enabling SNMP Notifications, page 40-9
• Configuring the Notification Target User, page 40-11
• Configuring Event Security, page 40-11
• Viewing the SNMP Events Log, page 40-12
Configuring SNMPv2c Notifications
To configure SNMPv2c notifications using Fabric Manager, follow these steps:
Step 1 Expand Switches > Events and then select SNMP Traps in the Physical Attributes pane.
You see the SNMP notification configuration in the Information pane shown in Figure 40-6.
Figure 40-6 SNMP Notifications
Step 2 Click the Destinations tab to add or modify a receiver for SNMP notifications.
Step 3 Click Create Row to create a new notification destination.
You see the Create Destinations dialog box shown in Figure 40-7.
To Next Page
Loading...
Need help?
General
