Send documentation comments to mdsfeedback-doc@cisco.com
36-42
Cisco MDS 9000 Family Fabric Manager Configuration Guide
OL-17256-03, Cisco MDS NX-OS Release 4.x
Chapter 36 Configuring FICON
Default Settings
The director history buffer provides a mechanism to determine the change in the port state from the
previous time when a value was contained in the key counter.
To view the directory history buffer using Device Manager, follow these steps:
Step 1 Choose FICON > VSANs.
You see the FICON VSANs dialog box.
Step 2 Click the Director History button.
You see the history buffer dialog box.
Step 3 Click Close to close the dialog box.
Default Settings
Table 36-3 lists the default settings for FICON features.
Table 36-3 Default FICON Settings
Parameters Default
FICON feature Disabled.
Port numbers Same as port addresses.
FC ID last byte value 0 (zero).
EBCDIC format option US-Canada.
Switch offline state Hosts are allowed to move the switch to an offline state.
Mainframe users Allowed to configure FICON parameters on Cisco MDS
switches.
Clock in each VSAN Same as the switch hardware clock.
Host clock control Allows host to set the clock on this switch.
SNMP users Configure FICON parameters.
Port address Not blocked.
Prohibited ports Ports 90–253 and 255 for the Cisco MDS 9200 Series
switches.
Ports 250–253 and 255 for the Cisco MDS 9500 Series
switches.
To Next Page
Loading...
Need help?
General
