Send documentation comments to mdsfeedback-doc@cisco.com
29-28
Cisco MDS 9000 Family Fabric Manager Configuration Guide
OL-17256-03, Cisco MDS NX-OS Release 4.x
Chapter 29 Configuring Inter-VSAN Routing
IVR Zones and IVR Zone Sets
Figure 29-21 Edit Zone Database Dialog Box
Step 2
Select a Zoneset folder and then click Activate to activate the zone set (shown in Figure 29-21) or click
Deactivate to deactivate an activated zone set.
You see the Save Configuration dialog box shown in Figure 29-22.
Figure 29-22 Save Configuration Options for a New Zone Set
Step 3 (Optional) Check one of the Save Running to Configuration check boxes to save these changes to the
startup configuration (see Figure 29-22).
Step 4 Click Continue Activation to activate the zone set (see Figure 29-22) or Yes if you are deactivating the
zone set.
Note The active zone set in Edit Zone is shown in bold if any change has been made to the full zone
set resulting in a difference between the active zone set and full zone set. Activating the zone set
unbolds it.
Recovering an IVR Full Zone Database
You can recover an IVR zone database by copying the IVR full zone database from another switch.
To recover an IVR zone database using Fabric Manager, follow these steps:
Step 1 Choose Zone > IVR > Edit Local Full Zone Database.
You see the Edit IVR Local Full Zone Database dialog box.
To Next Page
Loading...
Need help?
General
