Send documentation comments to mdsfeedback-doc@cisco.com
43-9
Cisco MDS 9000 Family Fabric Manager Configuration Guide
OL-17256-03, Cisco MDS NX-OS Release 4.x
Chapter 43 Configuring Certificate Authorities and Digital Certificates
Configuring CAs and Digital Certificates
Note The OSCP URL must be configured before configuring the revocation checking method.
Step 9 Click Create to successfully create the trust point CA.
Copying Files to Bootflash
To copy files to bootflash using Device Manager, follow these steps:
Step 1 Choose Admin > Flash Files.
Step 2 Select bootflash in the Device field.
You see a list of flash files in the dialog box shown in Figure 43-5.
Figure 43-5 Flash Files
Step 3 Click Copy.
You see the Copy Files dialog box shown in Figure 43-6.
To Next Page
Loading...
