Send documentation comments to mdsfeedback-doc@cisco.com
2-39
Cisco MDS 9000 Family Fabric Manager Configuration Guide
OL-17256-03, Cisco MDS NX-OS Release 4.x
Chapter 2 Installing Cisco MDS NX-OS and Fabric Manager
Upgrading Fabric Manager Server and Fabric Manager Standalone Version Using the Fabric Manager Update
Upgrading Fabric Manager Server and Fabric Manager
Standalone Version Using the Fabric Manager Update Installer
As of Release 3.3(1a), you can use the Cisco MDS 9000 Fabric Manager Update Installer to upgrade:
• Fabric Manager Server
• Fabric Manager Standalone
The Fabric Manager Update Installer is smaller in size than the Fabric Manager installer which makes it
easier to download. The update Installer has limited capability to upgrade Fabric Manager Server or the
Fabric Manager Standalone version and it does not have the capability to install a database or the Fabric
Manager Server infrastructure (JBoss).
Table 2-4 shows the recommended Fabric Manager upgrade
paths.
Ta b l e 2-4 Fabric Manager Upgrade Path Using Update Installer
Current Version Upgrading To Upgrade Path
3.0(x)
1
3.3(1a) or above 1. Upgrade to 3.1(x).
2. Upgrade to 3.2(x).
3. Upgrade to 3.3(x) or above by launching the
update installer {java –Xmx512m –jar
jar_file_name} and then follow the steps to
upgrade Fabric Manager.
Note Change the server port to 9099 if you are
not upgrading from Release 3.2(2c) in
Step 2.
3.1(x)
1
3.3(1a) or above 1. Upgrade to 3.2(x).
2. Upgrade to 3.3(x) or above by launching the
update installer {java –Xmx512m –jar
jar_file_name} and then follow the steps to
upgrade Fabric Manager.
Note Change the server port to 9099 if you are
not upgrading from Release 3.2(2c) in
Step 1.
To Next Page
Loading...
Need help?
General
