Send documentation comments to mdsfeedback-doc@cisco.com
lvii
Cisco MDS 9000 Family Fabric Manager Configuration Guide
OL-17256-03, Cisco MDS NX-OS Release 4.x
New and Changed Information
This document provides release-specific information for each new and changed feature in Cisco MDS
Fabric Manager Release 4.x software. The Cisco MDS 9000 Family Fabric Manager Configuration
Guide is updated to address each new and changed feature. The latest version of this document is
available at the Cisco MDS 9000 NX-OS Software Configuration Guides website.
Tip The configuration guides created for earlier releases are also listed at the aforementioned website. Each
guide addresses the features introduced or available in those releases. Select and view the configuration
guide pertinent to the software installed in your switch.
To check for additional information about this release, refer to the Cisco MDS 9000 Family Release
Notes available at the Cisco MDS 9000 NX-OS Software Release Notes website.
Table 1 summarizes the new and changed features for the Cisco MDS 9000 Family Fabric Manager
Configuration Guide, and tells you where they are documented. The table includes a brief description of
each new feature and the release in which the change occurred.
Table 1 New and Changed Features for Cisco MDS Fabric Manager Release 4.x
Feature GUI Change Description
Changed
in
Release Where Documented
Port Guard and Port
Owner
New Interface Port
Guard tab and updated
General tab.
Added port guard and port owner
configuration procedures.
4.1(3a) Chapter 20, “Configuring
Interfaces”
F Port Trunking Trunking GUI accepts F
ports and NP ports.
Added information about
configuring F port trunking across
the chapter including key concepts,
guidelines and restritions, upgrade
and downgrade considerations,
trunking and channeling protocols,
trunk modes, and allowed VSAN
lists.
4.1(3a) Chapter 24, “Configuring
Trunking”
F and TF
PortChanneling
Channel creation
dialogs accept F ports
and NP ports.
Added information about
configuring F and TF PortChannels
including guidelines and
restrictions, interface addition, and
compatibility check.
4.1(3a) Chapter 23, “Configuring
PortChannels”
To Next Page
Loading...
Need help?
General
