Send documentation comments to mdsfeedback-doc@cisco.com
39-21
Cisco MDS 9000 Family Fabric Manager Configuration Guide
OL-17256-03, Cisco MDS NX-OS Release 4.x
Chapter 39 Configuring Users and Common Roles
Configuring Cisco ACS Servers
Configuring Cisco ACS Servers
The Cisco Access Control Server (ACS) uses TACACS+ and RADIUS protocols to provide AAA
services that ensure a secure environment.When using the AAA server, user management is normally
done using Cisco ACS.
Figure 39-13, Figure 39-14, Figure 39-15, and Figure 39-16 display ACS server
user setup configurations for network-admin roles and multiple roles using either TACACS+ or
RADIUS.
Caution Cisco MDS NX-OS does not support all numeric usernames, whether created with TACACS+ or
RADIUS, or created locally. Local users with all numeric names cannot be created. If an all numeric user
name exists on an AAA server and is entered during login, the user is not logged in.
Note Each role specified in the cisco-av-pair must exist in the MDS, or the user will have the network-operator
role.
Figure 39-13 Configuring the Network-admin Role When Using RADIUS
To Next Page
Loading...
Need help?
General
