Send documentation comments to mdsfeedback-doc@cisco.com
63-5
Cisco MDS 9000 Family Fabric Manager Configuration Guide
OL-17256-03, Cisco MDS NX-OS Release 4.x
Chapter 63 Configuring Fabric Configuration Servers
Displaying FCS Fabric Ports
Step 4 Enter the VSAN ID, or select the ID from the drop-down list of available VSAN IDs.
Step 5 Enter the Fabric Configuration Server name in the Name field.
Step 6 Choose the type of server (Gateway, Host, Storage).
Step 7 Enter the WWNs for the server.
Step 8 Enter the management addresses for the server.
Step 9 Click Create to create the server, or click Close to discard your changes and return to the Fabric Config
Server dialog box.
Displaying FCS Fabric Ports
To display FCS discovery information using Device Manager, follow these steps:
Step 1 Choose FC > Advanced > Fabric Config Server.
You see the Fabric Config Server dialog box.
Step 2 Click the Fabric Ports tab.
You see a list of fabric ports (see Figure 63-5).
To Next Page
Loading...
Need help?
General
