Send documentation comments to mdsfeedback-doc@cisco.com
7-34
Cisco MDS 9000 Family Fabric Manager Configuration Guide
OL-17256-03, Cisco MDS NX-OS Release 4.x
Chapter 7 Fabric Manager Web Client
Inventory
Figure 7-27 End Devices Tab
Step 2
Expand a fabric and select one of the VSANs to display end device inventory information for that VSAN.
Note If you filter by hosts or enclosures, you can click a host in the resulting table to see host enclosure
performance, a list of hosts, a list of hosts to which your device is connected, and the connection paths.
This allows you to see performance statistics for hosts and enclosures.
You can also filter by end devices or by port groups to view aggregate information for those port groups,
such as peak and average usage.
Viewing Detailed Information for ISLs
To view detailed inventory information about ISLs using Fabric Manager Web Client, follow these steps:
Step 1 Click the Inventory tab, and then click ISLs.
You see the ISLs tab window as shown in Figure 7-28.
To Next Page
Loading...
Need help?
General
