Send documentation comments to mdsfeedback-doc@cisco.com
26-11
Cisco MDS 9000 Family Fabric Manager Configuration Guide
OL-17256-03, Cisco MDS NX-OS Release 4.x
Chapter 26 Configuring and Managing VSANs
VSAN Configuration
Figure 26-7 Deleting a VSAN
You see a confirmation dialog box.
Step 3 Click Yes to confirm the deletion or No to close the dialog box without deleting the VSAN.
About Load Balancing
Load balancing attributes indicate the use of the source-destination ID (src-dst-id) or the originator
exchange OX ID (src-dst-ox-id, the default) for load balancing path selection.
Configuring Load Balancing
To configure load balancing on an existing VSAN using Fabric Manager, follow these steps:
Step 1 Choose Fabricxx > All VSANs from the Logical Domains pane.
You see the VSAN configuration in the Information pane shown in Figure 26-8.
Figure 26-8 All VSAN Attributes
Step 2 Select a VSAN and complete the LoadBalancing field.
To Next Page
Loading...
Need help?
General
