Send documentation comments to mdsfeedback-doc@cisco.com
16-4
Cisco MDS 9000 Family Fabric Manager Configuration Guide
OL-17256-03, Cisco MDS NX-OS Release 4.x
Chapter 16 Managing Configuration Files
Using the File System
Figure 16-4 Flash Files Dialog Box
Step 2 Select the device and partition from the drop-down lists for the directory where you want to create the
directory.
Step 3 Click the Create Directory icon to create a directory.
You see the Create New Directory dialog box as shown in Figure 16-5.
Figure 16-5 New Directory Dialog Box
Step 4
Enter the name of the new directory, and click OK.
You see the new directory in the directory listing.
Tip Any directory saved in the volatile: file system is erased when the switch reboots.
Deleting an Existing File or Directory
To delete a file or directory using Device Manager, follow these steps:
Step 1 Click Admin > Flash Files.
By default, you see the bootflash: directory listed for the supervisor’s local partition (see Figure 16-6).
To Next Page
Loading...
Need help?
General
