EasyManua.ls Logo

Cisco AP775A - Nexus Converged Network Switch 5010

Cisco AP775A - Nexus Converged Network Switch 5010
1486 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
Send documentation comments to mdsfeedback-doc@cisco.com
51-13
Cisco MDS 9000 Family Fabric Manager Configuration Guide
OL-17256-03, Cisco MDS NX-OS Release 4.x
Chapter 51 Configuring IP Services
Default Settings
Default Settings
Table 51-1 lists the default settings for DNS features.
Table 51-2 lists the default settings for VRRP features.
Ta b l e 51-1 Default DNS Settings
Parameters Default
Domain lookup Disabled.
Domain name Disabled.
Domains None.
Domain server None.
Maximum domain servers 6.
Ta b l e 51-2 Default VRRP Settings
Parameters Default
Virtual router state Disabled.
Maximum groups per VSAN 255.
Maximum groups per Gigabit Ethernet port 7.
Priority preemption Disabled.
Virtual router priority 100 for switch with secondary IP addresses.
255 for switches with the primary IP address.
Priority interface state tracking Disabled.
Advertisement interval 1 second for IPv4.
100 centiseconds for IPv6.

Table of Contents

Other manuals for Cisco AP775A - Nexus Converged Network Switch 5010

Related product manuals