Send documentation comments to mdsfeedback-doc@cisco.com
7-35
Cisco MDS 9000 Family Fabric Manager Configuration Guide
OL-17256-03, Cisco MDS NX-OS Release 4.x
Chapter 7 Fabric Manager Web Client
Inventory
Figure 7-28 ISLs Tab
Step 2
Expand a fabric and select one of the VSANs to display ISL inventory information for that VSAN.
Note There are variations to this procedure. In addition to these basic steps, you can also:
• Select the status level, and click Filter to filter the display to show all ISLs or only those with errors.
Viewing Detailed Information for NPV Links
To view detailed inventory information about NPV Links using Fabric Manager Web Client, follow these
steps:
Step 1 Click the Inventory tab, and then click NPV Links.
You see the NPV Links tab window as shown in Figure 7-29.
To Next Page
Loading...
Need help?
General
