Send documentation comments to mdsfeedback-doc@cisco.com
68-3
Cisco MDS 9000 Family Fabric Manager Configuration Guide
OL-17256-03, Cisco MDS NX-OS Release 4.x
Chapter 68 Monitoring System Processes and Logs
Core and Log Files
Figure 68-2 System Dialog Box
Step 2 Click Close to close the dialog box.
Core and Log Files
This section contains the following topics:
• Displaying Core Status, page 68-3
• Clearing the Core Directory, page 68-4
For information on copying core and log files, refer to the Cisco MDS 9000 Family CLI Configuration
Guide.
Displaying Core Status
Note Be sure SSH2 is enabled on this switch.
To display cores on a switch using Device Manager, follow these steps:
Step 1 Choose Admin > Show Cores.
You see the Show Cores dialog box shown in Figure 68-3.
To Next Page
Loading...
Need help?
General
