Cisco AP775A - Nexus Converged Network Switch 5010 User Manual

Send documentation comments to mdsfeedback-doc@cisco.com
25-15
Cisco MDS 9000 Family Fabric Manager Configuration Guide
OL-17256-03, Cisco MDS NX-OS Release 4.x
Chapter 25 Configuring Domain Parameters
Domain IDs
Displaying Session Status
To display the status of the distribution session using Fabric Manager, follow these steps:
Step 1 Expand Fabricxx > VSANxx > Domain Manager and then select Allowed in the Logical Domains pane
for the fabric and VSAN for which you want to set the allowed domain ID list.
Step 2 View the CFS configuration and session status in the Information pane.
About Contiguous Domain ID Assignments
By default, the contiguous domain assignment is disabled. When a subordinate switch requests the
principal switch for two or more domains and the domains are not contiguous, the following cases apply:
• If the contiguous domain assignment is enabled in the principal switch, the principal switch locates
contiguous domains and assigns them to the subordinate switches. If contiguous domains are not
available, the NX-OS software rejects this request.
• If the contiguous domain assignment is disabled in the principal switch, the principal switch assigns
the available domains to the subordinate switch.
Enabling Contiguous Domain ID Assignments

Cisco AP775A - Nexus Converged Network Switch 5010 Specifications

General

Brand	Cisco
Model	AP775A - Nexus Converged Network Switch 5010
Category	Switch
Language	English