Cisco AP775A - Nexus Converged Network Switch 5010 User Manual

Send documentation comments to mdsfeedback-doc@cisco.com
59-4
Cisco MDS 9000 Family Fabric Manager Configuration Guide
OL-17256-03, Cisco MDS NX-OS Release 4.x
Chapter 59 Configuring RMON
Enabling 32-Bit and 64-Bit Alarms
Step 7 Click Create.
Step 8 Confirm the operation to define an alarm and a log event when the system prompts you to define a
severity event. If you do not confirm the operation, the system only defines a log event.
Step 9 Click More then click the Alarms tab from the Threshold Manager dialog box to verify the alarm you
created.
Step 10 Close both dialog box pop-ups.
Enabling 32-Bit and 64-Bit Alarms
To configure an RMON alarm for one or more ports using Device Manager, follow these steps:
Step 1 Choose Admin > Events > Threshold Manager and click the FC Interfaces > Create tab.
You see the create 32-bit and 64-bit alarm dialog box shown in Figure 59-2.
Figure 59-2 Create 32 and 64-Bit Dialog Box

Cisco AP775A - Nexus Converged Network Switch 5010 Specifications

General

Brand	Cisco
Model	AP775A - Nexus Converged Network Switch 5010
Category	Switch
Language	English