Send documentation comments to mdsfeedback-doc@cisco.com
7-30
Cisco MDS 9000 Family Fabric Manager Configuration Guide
OL-17256-03, Cisco MDS NX-OS Release 4.x
Chapter 7 Fabric Manager Web Client
Inventory
Step 1 Click the Inventory tab, and then click VSANs.
You see the VSANs tab window as shown in Figure 7-23.
Figure 7-23 VSANs Tab
Step 2 Select one of the fabrics to display VSAN inventory information for that fabric.
Note There are variations to this procedure. In addition to these basic steps, you can also:
• Select the status level, then click Filter to filter the display to show all VSANs or just those with
errors.
Viewing Detailed Information for Switches
To view detailed inventory information about switches using Fabric Manager Web Client, follow these
steps:
Step 1 Click the Inventory tab, and then click VSANs.
You see the Switches tab window as shown in Figure 7-24.
To Next Page
Loading...
Need help?
General
