Send documentation comments to mdsfeedback-doc@cisco.com
62-14
Cisco MDS 9000 Family Fabric Manager Configuration Guide
OL-17256-03, Cisco MDS NX-OS Release 4.x
Chapter 62 Configuring Call Home
E-Mail Options
Step 4 Select the Create Row icon.
You see the Create Call Home Profile dialog box.
Step 5 Select switches to send alerts.
Step 6 Enter the name of the profile.
Step 7 Select the message format, message size, and message severity level.
Step 8 Check the RMON check box in the AlertGroups section.
Step 9 Click Create to create the profile for the RMON-based alerts.
Step 10 Close the dialog box.
E-Mail Options
You can configure the from, reply-to, and return-receipt e-mail addresses. While most e-mail address
configurations are optional, you must configure the SMTP server address for the Call Home
functionality to work.
Configuring General E-Mail Options Using Fabric Manager
To configure general e-mail options using Fabric Manager, follow these steps:
Step 1 Select a switch in the Fabric pane.
Step 2 Expand Switches, expand Events, and select Call Home in the Physical Attributes pane.
You see the Call Home information in the Information pane.
Step 3 Click the e-mail Setup tab.
Figure 62-11 Call Home e-mail Setup Tab
Step 4 Select a switch in the Information pane.
Step 5 Enter the general e-mail information.
Step 6 Enter the SMTP server IP address type, IP address or name, and port.
Step 7 Click the Apply Changes icon to update the e-mail options.
To Next Page
Loading...
Need help?
General
