Send documentation comments to mdsfeedback-doc@cisco.com
7-44
Cisco MDS 9000 Family Fabric Manager Configuration Guide
OL-17256-03, Cisco MDS NX-OS Release 4.x
Chapter 7 Fabric Manager Web Client
Admin
Figure 7-37 Modify Scheduled Jobs
Step 3
Click the calander next to Start Date to modify the date settings.
Step 4 Select the Start Time drop-down list to modify time settings.
Step 5 Click to select the appropriate radio button to change the frequency of generating report.
Step 6 (Optional) - Check the Email Notification check box to get the report by e-mail.
Step 7 Click Edit Job to save changes.
Admin
Note Only network administrators can access the Fabric Manager Web Client Admin tab. Network operators
cannot view the Admin tab.
The Admin tab allows you to perform minor administrative and configuration tasks on the Fabric
Manager Server sending data to your web client.
The Admin tab contains the following subtabs:
• Status—Displays the status of, and allows you to start and stop, the Database Server, Fabric
Manager Server, and Performance Collector services on your server. You should only need to restart
services if something is not working properly, or if too large a percentage of system resources are
being consumed.
• Configure—Allows you to configure various parameters for Fabric Manager Server.
• Logs—Allows you to view all the logs from the various services running on the Fabric Manager
Server.
To Next Page
Loading...
Need help?
General
