Send documentation comments to mdsfeedback-doc@cisco.com
6-2
Cisco MDS 9000 Family Fabric Manager Configuration Guide
OL-17256-03, Cisco MDS NX-OS Release 4.x
Chapter 6 Device Manager
Launching Device Manager
• View chassis, module, port status, and statistics.
Launching Device Manager
You can launch Device Manager two ways.
To launch Device Manager from your desktop, double-click the Device Manager icon and follow the
instructions described in the
“Integrating Cisco Fabric Manager with Other Management Tools” section
on page 2-40.
Launch Device Manager from Fabric Manager, any of three ways:
• Right-click the switch you want to manage on the Fabric pane map and choose Device Manager
from the menu that appears.
• Double-click a switch in the Fabric pane map.
• Select a switch in the Fabric pane map and choose Tools > Device Manager.
Using Device Manager
This section describes the Device Manager interface, as shown in Figure 6-1.
To Next Page
Loading...
Need help?
General
