Send documentation comments to mdsfeedback-doc@cisco.com
62-31
Cisco MDS 9000 Family Fabric Manager Configuration Guide
OL-17256-03, Cisco MDS NX-OS Release 4.x
Chapter 62 Configuring Call Home
Event Triggers
Table 62-3 lists event categories and command outputs.
Call Home Supervisor
Hardware and
CISCO_TAC
MGMT_PORT_FAILURE Hardware failure of management
Ethernet port.
5
License LICENSE_VIOLATION Feature in use is not licensed, and are
turned off after grace period expiration.
6
Inventory Inventory and
CISCO_TAC
COLD_BOOT Switch is powered up and reset to a cold
boot sequence.
2
HARDWARE_INSERTION New piece of hardware inserted into the
chassis.
2
HARDWARE_REMOVAL Hardware removed from the chassis. 2
Test Test and
CISCO_TAC
TEST User generated test. 2
Port syslog Syslog-group-
port
SYSLOG_ALERT Syslog messages corresponding to the
port facility.
2
RMON RMON RMON_ALERT RMON alert trigger messages. 2
Table 62-2 Event Triggers (continued)
Event Alert Group Event Name Description
Call Home
Message Level
Ta b l e 62-3 Event Categories and Executed Commands
Event Category Description Executed Commands
System
show module
show version
show tech-support
platform
show tech-support
sysmgr
show hardware
show sprom all
Events generated by failure of a software system that is critical to unit
operation.
show tech-support
show system redundancy
status
Environmental
show module
show version
show environment
show logging logfile | tail
-n 200
Events related to power, fan, and environment sensing elements such
as temperature alarms.
show module
show environment
To Next Page
Loading...
Need help?
General
