Cisco AP775A - Nexus Converged Network Switch 5010 User Manual

Send documentation comments to mdsfeedback-doc@cisco.com
Contents
xi
Cisco MDS 9000 Family Fabric Manager Configuration Guide
OL-17256-03, Cisco MDS NX-OS Release 4.x
Configuring CDP 12-12
CHAPTER 13 Using the CFS Infrastructure 13-1
About CFS 13-1
Cisco MDS NX-OS Features Using CFS 13-2
CFS Features 13-2
CFS Protocol 13-3
CFS Distribution Scopes 13-3
CFS Distribution Modes 13-4
Uncoordinated Distribution 13-4
Coordinated Distribution 13-4
Unrestricted Uncoordinated Distributions 13-4
Disabling CFS Distribution on a Switch 13-4
CFS Application Requirements 13-5
Enabling CFS for an Application 13-5
Locking the Fabric 13-6
Committing Changes 13-7
Discarding Changes 13-8
Saving the Configuration 13-8
Clearing a Locked Session 13-8
CFS Merge Support 13-9
Displaying CFS Configuration Information 13-9
CFS Distribution over IP 13-10
Configuring Static IP Peers for CFS over IP 13-11
Adding Peers to List 13-12
Removing an NPV Device from the Peer List 13-14
CFS Regions 13-16
About CFS Regions 13-16
Managing CFS Regions Using Fabric Manager 13-17
Creating CFS Regions 13-17
Assigning Features to CFS Regions 13-17
Moving a Feature to a Different Region 13-18
Removing a Feature from a Region 13-19
Deleting CFS Regions 13-19
CFS Example Using Fabric Manager 13-20
CFS Example Using Device Manager 13-23
Default Settings 13-23

Cisco AP775A - Nexus Converged Network Switch 5010 Specifications

General

Brand	Cisco
Model	AP775A - Nexus Converged Network Switch 5010
Category	Switch
Language	English