Cisco AP775A - Nexus Converged Network Switch 5010 User Manual

Send documentation comments to mdsfeedback-doc@cisco.com
62-39
Cisco MDS 9000 Family Fabric Manager Configuration Guide
OL-17256-03, Cisco MDS NX-OS Release 4.x
Chapter 62 Configuring Call Home
Message Contents
Ta b l e 62-8 User-Generated Test Message Format
Data Item
(Plain text and XML)
Description
(Plain text and XML)
XML Tag
(XML only)
Time stamp Date and time stamp of event in ISO time notation:
YYYY-MM-DDTHH:MM:SS.
Note The time zone or daylight savings time (DST) offset from UTC
has already been added or subtracted. T is the hardcoded limiter
for the time.
/mml/header/time -
ch:EventTime
Message name Name of message. Specifically test message for test type message.
Specific event names listed in the
“Event Triggers” section on
page 62-30).
/mml/header/name
Message type Specifically “Test Call Home”. /mml/header/type - ch:Type
Message group This field should be ignored by the receiving Call Home processing
application, but may be populated with either “proactive” or “reactive”.
/mml/header/group
Severity level Severity level of message, test Call Home message (see Table 62-4). /mml/header/level -
aml-block:Severity
Source ID Product type for routing. /mml/header/source -
ch:Series
Device ID Unique device identifier (UDI) for end device generating message. This
field should empty if the message is non-specific to a fabric switch.
Format: type@Sid@serial, where
• type is the product model number from backplane SEEPROM.
• @ is a separator character.
• Sid is “C” identifying the serial ID as a chassis serial number·
• serial is the number identified by the Sid field.
Example: DS-C9509@C@12345678
/mml/ header /deviceId
Customer ID Optional user-configurable field used for contract info or other ID by any
support service.
/mml/header/customerID -
ch:CustomerId
Contract ID Optional user-configurable field used for contract info or other ID by any
support service.
/mml/header/contractId -
ch:ContractId
Site ID Optional user-configurable field used for Cisco-supplied site ID or other
data meaningful to alternate support service.
/mml/header/siterId -
ch:SiteId
Server ID If the message is generated from the fabric switch, it is the Unique device
identifier (UDI) of the switch.
Format: type@Sid@serial, where
• type is the product model number from backplane SEEPROM.
• @ is a separator character.
• Sid is “C” identifying the serial ID as a chassis serial number·
• serial is the number identified by the Sid field.
Example: “DS-C9509@C@12345678
/mml/header/serverId -
-blank-
Message description Short text describing the error. /mml/body/msgDesc -
ch:MessageDescription

Cisco AP775A - Nexus Converged Network Switch 5010 Specifications

General

Brand	Cisco
Model	AP775A - Nexus Converged Network Switch 5010
Category	Switch
Language	English