Cisco AP775A - Nexus Converged Network Switch 5010 User Manual

Send documentation comments to mdsfeedback-doc@cisco.com
67-17
Cisco MDS 9000 Family Fabric Manager Configuration Guide
OL-17256-03, Cisco MDS NX-OS Release 4.x
Chapter 67 Management Software FAQ
Other
linkFailCreditLoss Link failure due to excessive credit loss
indications.
linkFailCreditLossB2B Link failure when link reset (LR) operation fails
due to queue not empty.
linkFailDebounceTimeout Link failure due to re-negotiation failed.
linkFailLineCardPortShutdown Link failure due to port shutdown.
linkFailLinkReset Link failure due to link reset.
linkFailLIPF8Rcvd Link failure due to F8 LIP received.
linkFailLIPRcvdB2B Link failure when loop initialization (LIP)
operation fails due to non empty receive queue.
linkFailLossOfSignal Link failure due to loss of signal.
linkFailLossOfSync Link failure due to loss of sync.
linkFailLRRcvdB2B Link failure when link reset (LR) operation fails
due to non-empty receive queue.
linkFailNOSRcvd Link failure due to non-operational sequences
received.
linkFailOLSRcvd Link failure due to offline sequences received.
linkFailOPNyRETB2B Link failure due to open primitive signal returned
while receive queue not empty.
linkFailOPNyTMOB2B Link failure due to open primitive signal timeout
while receive queue not empty.
linkFailPortInitFail Link failure due to port initialization failure.
linkFailPortUnusable Link failure due to port unusable.
linkFailRxQOverFlow Link failure due to receive queue overflow.
linkFailTooManyINTR Link failure due to excessive port interrupts.
linkFailure Physical link failure.
loopbackDiagFailure Loopback diagnostics failure.
loopbackIsolation Port is connected to another port in the same
switch.
noCommonVsanIsolation Trunk is isolated because there are no common
vsans with peer.
none No failure.
nonParticipating During loop initialization, the port is not allowed
to participate in loop operations
offline Physical link is in offline state as defined in the
FC-FS standards.
ohmsExtLBTest Link suspended due to external loopback
diagnostics failure.
other Undefined reason.
Table 67-2 Device Manager Tooltip Definitions (continued)
Tooltip Definition

Cisco AP775A - Nexus Converged Network Switch 5010 Specifications

General

Brand	Cisco
Model	AP775A - Nexus Converged Network Switch 5010
Category	Switch
Language	English