Send documentation comments to mdsfeedback-doc@cisco.com
B-3
Cisco MDS 9000 Family Fabric Manager Configuration Guide
OL-17256-03, Cisco MDS NX-OS Release 4.x
Appendix B Cisco Fabric Manager Unsupported Feature List
10 Troubleshooting Troubleshooting Your Fabric Loop Monitoring
Configuring CIM
CFS for FC Timers
Local Text Based Capture
Capturing FC Analyzer Frames Locally
Sending Captured FC Analyzer Frames to a Remote IP
Address
Clearing Configured FC Analyzer Information
Displaying a List of Hosts Configured for Remote
Capture
Using Fabric Analyzer Display Filters
Monitoring System Processes and
Logs
Saving the Last Core to Flash
Kernel Core Dumps
System Health Initiation
Loopback Test Configuration Frequency
Hardware Failure Action
Tests for a Specified Module
Clearing Previous Error Reports
Online Health Management System
• Enabling and Disabling the OHMS
• Enabling and Disabling Hardware Failure Action
• Configuring Onboard Failure Logging
• Clearing Previous Error Reports
• Performing Tests for a Specified Module
• Configuring Automatic Loopback Tests
• Performing SERDES Loopback Tests
Table B-1 Features Not Supported by Cisco Fabric Manager or Device Manage (continued)
Part Chapter/Category Procedure
To Next Page
Loading...
Need help?
General
