Cisco AP775A - Nexus Converged Network Switch 5010 - Page 1435

Send documentation comments to mdsfeedback-doc@cisco.com
Index
IN-5
Cisco MDS 9000 Family Fabric Manager Configuration Guide
OL-17256-03, Cisco MDS NX-OS Release 4.x
example configuration 43-17 to 43-36
Fabric Manager Web Services 7-5
identity 43-2
maintaining 43-14
maximum limits 43-36
monitoring 43-14
multiple 43-4
multiple trust points 43-3
peer certificates 43-5
purpose 43-2
CDP
configuring 12-12 to 12-13
configuring hold times 12-13
configuring refresh time interval globally 12-12
disabling globally 12-12
disabling on interfaces 12-12
packet transmission interval 12-12
certificate authorities. See CAs
certificate revocation lists. See CRLs
CFS
application requirements 13-5
configuring for NTP 12-8
default settings 13-23
description 13-1 to 13-4
disabling on a switch 13-4
displaying configuration information 13-9
distribution modes 13-4
distribution over IP 13-10
distribution scopes 13-3
enabling on a switch 13-4
example configuration using Device Manager 13-23
example configuration using Fabric Manager 13-20
example using Fabric Manager 12-8
feature description 13-2
iSLB config distribution 50-46
merge support 13-9
merge support (procedure) 13-22
protocol description 13-3
SAN-OS features supported 13-2
saving configurations 13-8
CFS applications
clearing session locks 13-8
committing changes 13-7
discarding changes 13-8
enabling 13-5
enabling (procedure) 13-6
fabric locking 13-6
CFS over IP
configuring static IP peers 13-11
default settings 13-23
description 13-10
CFS regions
assigning features 13-17
creating 13-17
deleting 13-19
description 13-16
moving a feature 13-18
removing a feature 13-19
usisng Fabric Manager 13-17
channelAdminDown tooltip 67-14
channelConfigurationInProgress tooltip 67-14
channelOperSuspended tooltip 67-14
CHAP authentication 50-28, 50-43, 50-57
CHAP challenge 50-30
CHAP response 50-30
CHAP user name 50-30
CIM
configuring 37-1, B-3
description 37-1
support 2-16
CIM servers
default settings 66-25
Cisco Access Control Server. See Cisco ACS
Cisco ACS
configuring for RADIUS 41-26 to 41-30
configuring for TACACS+ 41-26 to 41-30
cisco-av-pair
specifying for SNMPv3 41-13